Popular Products
Anti Skid
Premium
Vamicrete is your go-to handyman service, providing reliable, efficient, and skilled solutions for all your home and office repair needs.
Vamicrete Tile Adhesive is superior water resistant cement based especially formulated for Tile Adhesive. It contains selected graded dry sand, grey cement and imported & modified polymers that make the joints stronger and smoother.
Its Super Bond Technology further improves workability, water retention, durability and strong adhesions to surfaces.
Masonry surface should be clean, dry and free from dust, loose particles and voids. Pre-wet the blocks prior to the application of Vamicrete Tile Adhesive to ensure proper bonding.
Vamicrete Tile Adhesive contains eco-friendly fillers and additives. However, being sand and cement based, it is alkaline in nature. Direct contact with eyes and skin should be avoided. In case of eye contact, wash immediately with clean water for at least 15 minutes and seek medical assistance.
During mixing, always add Vamicrete Tile Adhesive to water and not water to the adhesive to achieve uniform consistency.
Vamicrete Tile Adhesive is available in 20 kg bags and has a shelf life of 6 months when stored in a cool and dry place.
As site conditions such as temperature and humidity vary, the above information should be considered as general guidelines.
Ensure masonry surfaces are free from dust and voids before application. Pre-wetting of blocks improves adhesion strength and performance.
Due to its alkaline nature, avoid direct eye and skin contact. In case of exposure, rinse thoroughly with clean water for at least 15 minutes and seek medical advice.
Mixing should always be done by adding adhesive powder into water for better workability.
Coverage of Vamicrete Tile Adhesive is approximately 50–55 sq.ft. per 20 kg bag at 3 mm thickness. Actual coverage depends on surface evenness, substrate condition and joint thickness.
Water Demand: Depending on substrate and climatic conditions, approximately 6–7 litres of water is required per 20 kg bag. The mortar should form a 3–6 mm adhesive bed.